Credit: Elisa Ferrari
A lineman works to replace a wooden pole with a composite pole.

Credit: Elisa Ferrari
SCE Air Ops pilot Brad Bohlmann looks down during a pole set on Catalina Island.

Credit: Elisa Ferrari
Linemen work on a fire-resistant composite pole.

Credit: Elisa Ferrari
Composite poles are set on Catalina Island using a helicopter.

Credit: Elisa Ferrari
A lineman works on a composite pole.

Credit: Elisa Ferrari
The Santa Ana crew works to set a 65 foot composite pole on Catalina Island.

Crews Install Fiberglass Power Poles in High Fire Risk Areas

SCE is working to replace wooden poles with composite poles to make a more resilient system.

First in a three-part series


Video Credit: Joseph Foulk, Ernesto Sanchez and Roberto Lazarte
All Photos: Elisa Ferrari


AVALON, Calif. — It’s 6:40 a.m. and the streets are quiet. But in the back parking lot of a Catalina Island restaurant, three five-man Southern California Edison crews and support staff are starting their day with the first of several safety discussions.

Their work assignment today: set two new fire-resistant composite power poles, 75 feet and 65 feet each, on the side of a remote, rugged mountain with the help of a helicopter to improve the resiliency of the utility’s grid. They will also need to cut and take down the wooden poles for eventual disposal.

“We are running this like a storm response, that’s what makes this project unique,” said Joshua Regalado, SCE district manager for the Orange Coast, which includes Huntington Beach, Westminster and Avalon, who is overseeing the Catalina pole-setting project. “That’s why all these districts are involved.”

Catalina Pole Set
SCE Air Ops pilot Brad Bohlmann looks down during a pole set on Catalina Island.


Today’s crews include the Santa Ana, Huntington Beach and Catalina Island crews. Since July 2, 85 employees from across SCE’s territory have been working to help install 67 fiberglass composite poles on the island. Similar work is taking place in about one-quarter of the utility’s 50,000 square miles of service territory in high fire risk areas.

“This is some of the most treacherous terrain we’ve ever seen and we are trying to do the job as safely and conscientiously as we can,” said Regalado. “It’s really awesome.”

By mid-morning, the buzzing sound of an A-Star helicopter’s rotor blades becomes increasingly louder. The Huntington Beach five-man crew, having hiked up the steep hill, wait to receive the new 75-foot, 1,800-pound composite pole that will be lowered on a line with a remote latch. As the e-crew foreman talks to the pilot via radio, the pilot sets the pole in a pre-dug deep hole.

Catalina Pole Set
An SCE truck is used to help straighten a fire-resistant composite pole.


As the fiberglass pole is lowered, the crew grabs the tag lines to steady the pole in place. A lineman signals to the pilot that he is good to safely fly off. The crew then backfills the hole with rocks and dirt to pad down and secure the pole.

“We can get these poles to the crews in less than three minutes,” said Brad Bohlmann, SCE Air Operations pilot. “This helps reduce exposure on this uneven terrain. The sooner I can get out of the work area, the better.”

With safety belts secured, three lineman climb the wood pole to transfer the 20-foot crossarm, conductors, insulators and eventually the 12 kV wires to the new pole. As a chain saw is roped up to the crew, the pilot returns to help remove the wood pole by first lowering a line with a remote hook that is attached to the pole. With precision timing, the lineman cuts the first section of the wood pole and when safe, the helicopter lifts it up and flies it to a laydown yard where it will be prepped for disposal.

The same trip takes place two more times till the wooden pole is removed. The crew then begins prepping the new composite pole, first by installing metal steps 18 inches apart so the crew can climb up the pole. The fiberglass material requires different restraint belts as the crew installs the insulators, crossarm and conductors.

Catalina Pole Set
A total of 67 fiberglass composite poles will be installed on Catalina Island by early September.


Down the hill, across a dirt road to another steeply rugged hill, wait the Santa Ana five-man crew to prep the 65-foot, 1300-pound composite pole. As the helicopter flies in to help set the pole, threading it between the lines of wire, the crew uses the taglines to steady the pole in place.

But this time, the pole is not leaning as straight as the crew would like. They work to quickly come up with a solution. Using three SCE trucks, they tie the tag lines to the vehicles to help pull the pole straight. Within 10 minutes, the crew has what they want and the transferring of the conductors and insulators takes place. The wires will be transferred to the new pole the next day.

“These composite poles are fairly new to us, we haven’t set a lot,” said Damian Spampinato, e-crew foreman with the Santa Ana crew. “The difficulties come with the positioning and the crew working in a limited space.

“We had to readjust and move some of the equipment to get the pole plumb,” he said, of the 65-foot pole. “We often problem solve and work around different scenarios. There is something new every day.”

The composite pole-setting project on Catalina is scheduled to be completed in early September. Similar efforts continue throughout SCE’s territory and these same crews and their colleagues will be called on to complete that work.

RELATED STORIES:

Second in a three-part series: Crews Help Protect Environment While Setting Fire-Resistant Poles

Leave a Comment

We welcome your feedback and comments. We ask that you please keep them constructive, civil and respectful. If you wouldn’t say it in front of your mother, then there is a good chance it falls outside of our guidelines. Please read our comment policy here.

Comments

Edison Energy and its subsidiaries are not the same company as Southern California Edison, the utility, and they are not regulated by the California Public Utilities Commission.

© 2018 Edison International

© 2018 Edison International

Download and Use Policy

This Site is owned by Edison International. Unless otherwise indicated, all of the content featured or displayed on this Site, including but not limited to, text, graphics, data, photographic images, moving images, sound, illustrations, computer code, trade marks and logos and the selection and arrangement thereof (referred to in this section as the "Content") is owned by Edison International, its licensors or its third-party image partners and all rights in relation to the Content are reserved. All Content is protected by copyright, trade dress, moral rights, trade mark rights and other laws relating to the protection of intellectual property. You may use the Content for your personal, or news-related, non-commercial use, but you may not otherwise reproduce, modify or in any way commercially exploit the Content.

Accept Decline