Credit: Clifford Ryan
John Harley Saiz, left, holds the burned-out metallic balloons from the Long Beach blast with members of his crew, from left to right, ...

Credit: John Saiz
Lineman James Yolla and Brandon Copp work on the Long Beach power pole repair before the nearby metallic balloons made their job unsafe.

Credit: John Saiz
This is what remains of the metallic balloons in Long Beach that left 3,056 homes and businesses without power — some for more than 10 ...

Keeping metallic balloons tied to decorative weights like these, as required by state law, would go a long way toward reducing the record ...

When disposing of metallic balloons, they should always be punctured to keep them from unsafely floating away.

Metallic Balloon Problem Worsens, Sometimes Dangerously

Amid record outages, the popular gifts should always be tied down and never released to avoid power disruptions and explosive situations.

  • By Paul Netter
  • February 08, 2018

Spanish / Chinese / Korean / Vietnamese

As bad as this metallic-balloon-caused explosion looks …

Courtesy of Long Beach Local News

… it could have been much worse.

People and workers could have been too close and seriously injured. In fact, a utility crew had been working on the power pole where these balloons eventually exploded last July in Long Beach before an astute foreman ordered them to stop work and, along with the ground crew, move a safe distance away.

Fortunately, that helped prevent any injuries, but it could not prevent the prolonged power outage that left 3,056 homes and businesses without electricity at 10:40 that Tuesday morning. Extensive repair work restored all power at 8:52 that night.

It is a situation that plays out hundreds of times a year because of adrift metallic balloons, and February typically marks the onset of a dramatic increase in outages caused by them that peaks in June.

And the worst part? It’s easily avoidable.

That, however, is easier said than done since Southern California Edison experienced for the third straight year a record number of metallic-balloon-caused power outages with 1,094 last year.

“Metallic balloons look harmless, but this incident proves again how dangerous they are when released outdoors,” said Andrew S. Martinez, vice president of Safety, Security and Business Resiliency at SCE. “People should always keep them tied to a weight, as state law requires, keep them indoors and never, ever release them outdoors — individually or in a bunch — to ensure safety and eliminate possible power outages.”

A new bill has been introduced in the California Assembly to combat the problem. 

Two metallic balloons were to blame in Long Beach, where lineman James Yolla and apprentice Brandon Copp from Hampton Tedder Electric, an SCE contractor, were doing repairs on a pole when crew foreman, John Harley Saiz, noticed an unusual sound. Seeking out its source, Saiz walked a short distance and saw the balloons tangled in power lines — about 50 feet from the on-the-pole linemen.

Metallic Balloon Outages February Infographic_final

Credit: Larry Tsuei

“The wind was kind of banging them together where I heard a thumping noise,” said Saiz. “They were halfway between where we were working and the next pole. In fact, one of the customers said she saw them go right past her window.”

Thinking safety first, Saiz had Yolla and Copp immediately climb down, made sure his workers and any other people were not in danger and called for an SCE troubleman to de-energize the lines to safely remove the balloons.

But, the balloons didn’t cooperate.

“Shortly after, maybe 10 to 15 minutes, [the balloons] worked their way to the pole we were working on and then the explosion occurred,” said Saiz, calling it the worst balloon incident he has experienced in his 20 years on electrical crews.

The blast engulfed the top 10 feet of the pole — including where the linemen had been working — and resulted in two downed power lines.

“After seeing it, the crew was in awe over how loud and how big the explosion actually was,” said Saiz. “My thoughts were that I’m really glad we took precautions to get the guys off the pole.”

A pole that Saiz’s crew, with the help of another Hampton Tedder crew, ended up replacing as part of the overall repair work in restoring power that went into the night.

Saiz now says the incident has had a lasting effect on his crew, adding, “It’s funny like every time we pull up to a job now, the crew notices [the balloons] right away hanging on the lines, whether they’ve been burned, melted or whatever. The crew notices them a lot more now than previously.”

Which only reinforces Saiz’s long-held thoughts on their release.

“I definitely don’t think any should ever be released,” he said. “Sooner or later, those balloons will find their way to the ground, and who knows whether or not they’re going to end up in a power line.”

Metallic Balloons Safety Tips

  • Metallic balloons should always be tied to a weight.
  • Stores and vendors should only sell properly weighted balloons.
  • Balloon owners should never remove the weight
  • Balloons should never be released outdoors.
  • Do not try to retrieve balloons tangled in power lines.
  • Puncture balloons before disposing of them.

Leave a Comment

We welcome your feedback and comments. We ask that you please keep them constructive, civil and respectful. If you wouldn’t say it in front of your mother, then there is a good chance it falls outside of our guidelines. Please read our comment policy here.

Comments

Edison Energy and its subsidiaries are not the same company as Southern California Edison, the utility, and they are not regulated by the California Public Utilities Commission.

© 2018 Edison International

© 2018 Edison International

Download and Use Policy

This Site is owned by Edison International. Unless otherwise indicated, all of the content featured or displayed on this Site, including but not limited to, text, graphics, data, photographic images, moving images, sound, illustrations, computer code, trade marks and logos and the selection and arrangement thereof (referred to in this section as the "Content") is owned by Edison International, its licensors or its third-party image partners and all rights in relation to the Content are reserved. All Content is protected by copyright, trade dress, moral rights, trade mark rights and other laws relating to the protection of intellectual property. You may use the Content for your personal, or news-related, non-commercial use, but you may not otherwise reproduce, modify or in any way commercially exploit the Content.

Accept Decline